Related Articles
The importance of custom boxes
Many companies order their own boxes to store information and announcements about new products, software packages and other electronic media, or the choice of brochures, pocket folders and folders. This article will help you understand your broad options when you apply for your own fields. For custom boxes visit Custom rigid boxes.
Some typical types of boxes include:
- wavy
- Plastic
- rotating edge
- Set boxes
- Aluminum
- SBS
- wood
Most people are familiar with sending boxes of dense brown (or kraft) custom rigid boxes cardboard. When you check the lateral cut of the custom rigid boxes slot C, you will notice that it is very wide and strong; Good to transport things, but not good to take the kind of graphics needed to launch the product.
The ripple of the E flute is only 1/16 “thick, much thinner than the C-slot mentioned above.For some requirements, an F-slot or a B-flute slot can be used) and used in boxes very small or in boxes that require a complicated die-cut, flute B is surprisingly thinner than flute C, but stronger than Flute E. weight projects. Custom rigid boxes cardboard is usually supplied with a mill and is defined by colors. Brown, white oyster, white.
White is the most expensive and most wanted board for graphic use.
The combinations are available upon request. Oysters on Kraft or Blanched on Kraft are common. Normally, the custom rigid boxes part of the custom rigid boxes cardboard is Kraft.
Custom rigid boxes cardboard decoration.
Many customers prefer that their custom rigid boxes boxes have graphics printed on 80 # liters of paper that can be filmed, laminated and mounted in custom rigid boxes. (This is the designation). The laminated film seals the print and allows the cabinet hinges to tilt without cracking. The label is attached to the custom rigid boxes plate before drilling. The lamination of the film can be bright or matte (also called flashing). The label can be applied outside or inside the box (also called liner) or both. The label usually covers the entire box.
Flexography:
Imagine a great seal and now you have a good idea of flexography. If complex graphics of 4 colors are not required, flexographic printing can be an alternative. Because flexography is not sophisticated, you can only expect a screen quality of 65 lines. This differs significantly from the quality of the 150-line screen common in lithographic printing (marking). The most cost-effective type of flexography is the coating (full coverage) of the color. Printable plates can be used to insert color on the board. However, if you need to flip a chart or type from a fixed matrix, or if you want a positive type or chart, you must make your own printing plate. Flexographic tables are valued per square inch. The more graphics or types, more expensive.
Click Here: Printcosmo
Screen printing:
For quantities too low to create expensive flexo plates, the screen printing alternative can be a cost-effective alternative. Modern technology has created a silkscreen almost as bright and clear as offset printing. We will start with your drawing on a computer disk or in a good black and white copy. The positive film is made from the prior art and mounted on an emulsion coated screen. The screen and the drawing (positive in the film) are exposed to light for several minutes. The work in black prevents the curing of the emulsion. The film is removed from the screen positively and the screen is washed with water at high speed. The emulsion where the drawing was washed left a drawing template on the screen. The screen is attached to the press and the squeegee places special paints on the screen on the material of its box.
The silkscreen colors are mixed by hand to match the color, but it is not an exact science. My silk canvas in many different colored materials and Pantone colors mixed by hand will look different when it comes to colors other than white. For more information visit Custom Cosmetics Boxes.
